Metal Bandsaw Blades
We guarantee that with a bandsaw blade bearing the GUHEMA name, you are buying a top product of cutting technology. The right benefit for your production process and a long service life of bandsaw blade and machine are ensured even in continuous, heavy-duty use.
Carbon Tool Steel Bandsaw Blades
Carbon tool steel (125 Cr 1)
- Bandsaw blade with hardened teeth
- For unalloyed steels up to medium strength
NC20... = Coils of 30.5 m or production coils
NE20... = Welded to length
Carbon tool steel (125 Cr 1)- Bandsaw blade with hardened teeth and back
- For structural, free-cutting and case-hardening steels
- Workshop master
NC22... = Coils of 30.5 m or production coils
NE22... = Welded to length
Bi-Metal Bandsaw Blades
M42 grade (material no. 1.3247)- For bundle cutting of profiles and tubes
- The special set prevents the bandsaw blade from jamming during cutting
NC33... = Coils of 30.5 m or production coils
NE33... = Welded to length
NC34... = Coils of 30.5 m or production coils
NE34... = Welded to length
M42 grade (material no. 1.3247)- Wear-resistant M42 tooth tips
- Particularly suitable for thin to medium-sized workpieces
NC35... = Coils of 30.5 m or production coils
NE35... = Welded to length
M42 grade (material no. 1.3247)- Wear-resistant M42 variable toothing
- Particularly suitable for low-vibration sawing of thin to medium-sized workpieces
NC35... = Coils of 30.5 m or production coils
NE35... = Welded to length
M42 grade (material no. 1.3247)- Wear-resistant M42 variable positive toothing
- Particularly suitable for low-vibration sawing of medium-sized to large workpieces
- High cutting performance and long service life
NC35... = Coils of 30.5 m or production coils
NE35... = Welded to length
M51 grade (similar to material no. 1.3207)- Extremely wear-resistant M51 variable positive toothing
- Ideal for low-vibration sawing of medium-sized to large workpieces
- Significantly higher tool life/cutting speed than the M42 grade (GUHEMA No. 35 VP Bi-Co-lastic)
- Suitable for difficult-to-cut materials
NC36... = Coils of 30.5 m or production coils
NE36... = Welded to length
Carbide Bandsaw Blades
Chromium-alloy backing band with carbide grit- For abrasive and composite materials
- Particularly suitable for cables and wires, ceramics, glass fibre and tyres
- Excels where saw teeth are at a disadvantage
NC40... = Coils of 30.5 m or production coils
NE40... = Welded to length
Chromium-alloy backing band with carbide grit- For abrasive and composite materials
- Particularly suitable for cables and wires, ceramics, glass fibre and tyres
- Excels where saw teeth are at a disadvantage
- The gulleted bandsaw blade ensures chip removal even with high chip volumes
NC41... = Coils of 30.5 m or production coils
NE41... = Welded to length
Chromium-alloy backing band with carbide teeth- Set-tooth, carbide-tipped bandsaw blade
- Your entry into carbide bandsaw blade technology
- Reliably cuts sand-encrusted castings
- Achieves significantly longer tool life than a bi-metal bandsaw blade
NC45... = Coils of 30.5 m or production coils
NE45... = Welded to length
Chromium-alloy backing band with carbide teeth- Ground, carbide-tipped bandsaw blade
- The ground saw teeth with roughing and finishing cutters allow maximum tool life and cutting speeds
- Made for difficult-to-cut materials and sand-encrusted workpieces
NC46... = Coils of 30.5 m or production coils
NE46... = Welded to length
Chromium-alloy backing band with carbide teeth- Ground, carbide-tipped bandsaw blade
- The ground saw teeth with roughing and finishing cutters allow maximum tool life and cutting speeds
- Special tooth form for machining extremely hard workpieces such as surface-hardened shafts
NC47... = Coils of 30.5 m or production coils
NE47... = Welded to length